Loading
LOADING IMAGES
product photo product drawing

End Mills / 123

Solid Carbide TuffCut® GP 2 Flute End Mill
Designed for deep pocket milling and other applications where standard flute lengths are too short.
  • 2 Flute
  • Solid carbide
  • Uncoated, available coated upon request
  • General purpose milling of most materials
  • Center Cutting
  • Long flute lengths, square end
  • 30° Helix Angle
  • For roughing and finishing applications
*This series has been obsoleted.  Tools with stock will be available until the stock is depleted and cannot be returned.  Contact customer service if you require an obsolete tool as a special.

Product Range

Tool No. EDP Diameter (DC) Shank Diameter (DCONMS) Overall Length (OAL) Flute Length (APMX) Neck Length (LU) Corner Radius (RE) Coating Helix Angle Center Cutting Shank Type Tool Construction # Flutes RH
.1181 12311810A 10971 3.0mm 3.0 64 25.0 ALtima® 30° 1 Straight Solid 2
.1250 12312500R.020 10973 1/8 1/8 2-1/2 1 .020R Uncoated 30° 1 Straight Solid 2
.1575 12315750A 10974 4.0mm 4.0 64 25.0 ALtima® 30° 1 Straight Solid 2
.1968 12319680A 10978 5.0mm 5.0 64 25.0 ALtima® 30° 1 Straight Solid 2
.2362 12323620 12309 6.0mm 6.0 76 30.0 Uncoated 30° 1 Straight Solid 2
.2362 12323620A 10979 6.0mm 6.0 76 30.0 ALtima® 30° 1 Straight Solid 2
.2500 12325000 12311 1/4 1/4 3 1-1/4 Uncoated 30° 1 Straight Solid 2
.3937 12339370A 10986 10.0mm 10.0 89 40.0 ALtima® 30° 1 Straight Solid 2
.4375 12343750 12321 7/16 7/16 4 1-3/4 Uncoated 30° 1 Straight Solid 2
.4724 12347240 12323 12.0mm 12.0 102 50.0 Uncoated 30° 1 Straight Solid 2
.4724 12347240A 10987 12.0mm 12.0 102 50.0 ALtima® 30° 1 Straight Solid 2
.5000 12350000 12325 1/2 1/2 4 2 Uncoated 30° 1 Straight Solid 2
.7874 12378740A 10992 20.0mm 20.0 133 80.0 ALtima® 30° 1 Straight Solid 2