Cyclone Drills - Series CXDCE

Carbide Coolant Fed Cyclone XD Drill, 15X  with Double Margin
Enhanced double margin design for quicker engagement in the hole, improved hole finish and improved location when drilling cross holes. Enhanced surface finish technology pre coating improves coating adhesion. Enhanced surface finish technology post coating improves chip evacuation. Refined Edge Protection.
  • 2 Flute
  • 15X Long length
  • Corner Chamfer
  • Coolant fed
  • Double margin
  • 140°-142° Point
  • 30° Helix
  • ALtima® Plus coated, AP=ALtima® Plus coated
  • ALtima® Plus is a multi-layer AlTiN coating that provides higher heat resistance, longer tool life and reduces chipping and wear
  • Material Applications: Steels, Cast Iron, Stainless Steel and Special and High Temp Alloys
* This is a non-stock and non-returnable item
Tool EDP Diameter Shank Diameter Oal Flute Length Included Angle Available Price
CXDCEM0300AP 07436 3.00mm 3 105 56.00 140°-
CXDCE1250AP 07437 1/8 4 120 60.00 140°-142°
CXDCEM0350AP 07438 3.50mm 4 120 66.00 140°-142°
CXDCE1406AP 07439 9/64 4 120 67.00 140°-142°
CXDCE1562AP 07440 5/32 4 120 74.00 140°-142°
CXDCEM0400AP 07441 4.00mm 4 120 75.00 140°-142°
CXDCEM0420AP 07442 4.20mm 5 143 79.00 140°-142°
CXDCEM0430AP 07443 4.30mm 5 143 81.00 140°-142°
CXDCEM0440AP 07444 4.40mm 5 143 83.00 140°-142°
CXDCE1875AP 07446 3/16 5 143 89.00 140°-142°
CXDCEM0450AP 07445 4.50mm 5 143 84.00 140°-142°
CXDCEM0480AP 07447 4.80mm 5 143 90.00 140°-142°
CXDCEM0490AP 07448 4.90mm 5 143 92.00 140°-142°
CXDCEM0500AP 07449 5.00mm 5 143 94.00 140°-142°
CXDCEM0520AP 07450 5.20mm 6 162 98.00 140°-142°
CXDCE2187AP 07453 7/32 6 162 104.00 140°-142°
CXDCEM0540AP 07451 5.40mm 6 162 101.00 140°-142°
CXDCEM0550AP 07452 5.50mm 6 162 103.00 140°-142°
CXDCEM0560AP 07454 5.60mm 6 162 105.00 140°-142°
CXDCEM0580AP 07455 5.80mm 6 162 109.00 140°-142°
CXDCEM0600AP 07456 6.00mm 6 162 113.00 140°-142°
CXDCEM0610AP 07457 6.10mm 8 200 114.00 140°-142°
CXDCEM0620AP 07458 6.20mm 8 200 116.00 140°-142°
CXDCE2500AP 07460 1/4 8 200 119.00 140°-142°
CXDCEM0630AP 07459 6.30mm 8 200 118.00 140°-142°
CXDCEM0650AP 07461 6.50mm 8 200 122.00 140°-142°
CXDCEM0680AP 07462 6.80mm 8 200 128.00 140°-142°
CXDCE2812AP 07464 9/32 8 200 134.00 140°-142°
CXDCEM0700AP 07463 7.00mm 8 200 131.00 140°-142°
CXDCEM0740AP 07465 7.40mm 8 200 139.00 140°-142°
CXDCE3125AP 07469 5/16 8 200 149.00 140°-142°
CXDCEM0750AP 07466 7.50mm 8 200 141.00 140°-142°
CXDCEM0760AP 07467 7.60mm 8 200 143.00 140°-142°
CXDCEM0780AP 07468 7.80mm 8 200 146.00 140°-142°
CXDCEM0800AP 07470 8.00mm 8 200 150.00 140°-142°
CXDCEM0820AP 07471 8.20mm 10 240 154.00 140°-142°
CXDCEM0830AP 07472 8.30mm 10 240 156.00 140°-142°
CXDCEM0840AP 07473 8.40mm 10 240 158.00 140°-142°
CXDCEM0850AP 07474 8.50mm 10 240 159.00 140°-142°
CXDCE3438AP 07476 11/32 10 240 164.00 140°-142°
CXDCEM0870AP 07475 8.70mm 10 240 163.00 140°-142°
CXDCEM0900AP 07477 9.00mm 10 240 169.00 140°-142°
CXDCEM0940AP 07478 9.40mm 10 240 176.00 140°-142°
CXDCE3750AP 07479 3/8 10 240 179.00 140°-142°
CXDCEM0980AP 07480 9.80mm 10 240 184.00 140°-142°
CXDCEM1000AP 07481 10.00mm 10 240 188.00 140°-142°
CXDCEM1020AP 07482 10.20mm 12 283 191.00 140°-142°
CXDCEM1030AP 07483 10.30mm 12 283 193.00 140°-142°
CXDCE4062AP 07484 13/32 12 283 193.00 140°-142°
CXDCEM1050AP 07485 10.50mm 12 283 197.00 140°-142°
CXDCEM1080AP 07486 10.80mm 12 283 203.00 140°-142°
CXDCEM1100AP 07487 11.00mm 12 283 206.00 140°-142°
CXDCE4375AP 07488 7/16 12 283 208.00 140°-142°
CXDCE4688AP 07491 15/32 12 283 223.00 140°-142°
CXDCEM1150AP 07489 11.50mm 12 283 216.00 140°-142°
CXDCEM1180AP 07490 11.80mm 12 283 221.00 140°-142°
CXDCEM1200AP 07492 12.00mm 12 283 225.00 140°-142°