LOADING IMAGES

product photo

product drawing

Burs / 72SM

Solid Carbide Edge Hog® Bur

Conical Micro Sizes

SCTI SM
Solid carbide 1/4" sizes and below, brazed construction over 1/4"
Inch and metric sizes
Single, double, and fine cuts available

Materials

Series Attributes

Downloads

Speed/feed and bur type of cut and applications data

Product Range

	Tool No.	EDP	Diameter (DC)	Shank Diameter (DCONMS)	End Diameter (NON-DC)	Overall Length (OAL)	Flute Length (APMX)	Included Angle (SIG)	Specification	Type of Cut	Coating	Shank Type

.1875	72100020	72217	3/16	1/8	.038	1-1/2	1/2	16°	SM-53	Single	Uncoated	Straight
.1875	72100027	72225	3/16	1/8	.038	1-1/2	1/2	16°	SM-53-D	Double Cut	Uncoated	Straight
.1875	72100030	72233	3/16	1/8	.038	1-1/2	1/2	16°	SM-53-F	Fine	Uncoated	Straight
.1890	72100020M	72221	4.8mm	3mm	0.97mm	38mm	12.7mm	16°	SM-53M	Single	Uncoated	Straight
.1890	72100027M	72229	4.8mm	3mm	0.97mm	38mm	12.7mm	16°	SM-53M-D	Double Cut	Uncoated	Straight
.1890	72100030M	72237	4.8mm	3mm	0.97mm	38mm	12.7mm	16°	SM-53M-F	Fine	Uncoated	Straight
.1890	72100026M	76788	4.8mm	3mm	0.97mm	38mm	12.7mm	16°	SM-53M Diam	Std Diamond	Uncoated	Straight
.1890	72100037M	76791	4.8mm	3mm	0.97mm	38mm	12.7mm	16°	SM-53M-F Alt Diam	Fine Alternate Diamond	Uncoated	Straight